Monitor Audio IA800-2C Amplifier
Monitor Audio IA800-2C Amplifier
Monitor Audio IA800-2C Amplifier
Monitor Audio Monitor Audio IA800-2C Amplifier Distribution Amplifiers
Monitor Audio

Monitor Audio IA800-2C Amplifier

$3,499

Seen it cheaper? Talk to us.Trade in your old amplifier typically $400–$900 toward this

In stock SKU: MON-IA800X-2C-AMP-BLK

Pickup available at Alexandria Showroom · Usually ready in 2-4 days

Ships from SydneyIn stock · free insured AU shipping · we confirm your dispatch date within one business day·
Australian warrantyAuthorised dealer, local support
Installation availableSydney metro, quoted with the gear

Key Information

  • Number Of Channels: 2 (1 Stereo Pair)
  • Power (W / Channel) @ 4 ohms: 800 W
  • Power (W / Channel) @ 8 ohms: 500 W

IA800-2C brings our Connect IP interface, which can be accessed by any device connected to the internet with a web browser on the same network. Delivering up to 800 watts per channel, this 2-channel will directly drive 70 V line speakers without a line matching transformer.

The IA800-2C is part of our Connect Amplifiers division, bringing our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.

Fluently delivering up to 800 watts per channel, this two-channel powerhouse can directly drive 70 V line speakers without a line matching transformer. Each channel has a volume adjustment on the front panel and the 2U high case universally fit into most racks whilst delivering 93% energy efficiency. And even though its likely to live its live on the rack, our design team have produced an especially handsome Installation Amplifier. Ready and waiting for any project.

SPECIFICATIONS

Connect' IP Control: Yes

Channel Number: 2 (1 Stereo Pair)

Power (W / Channel) | 4 ohms: 800 W

Power (W / Channel) | 8 ohms: 500 W

Power (W / Channel) | Bridge (8 ohms): 2000 W (1CH)

Power (W / Channel) | 70V: 800 W

Input Impedance: 20 K ohms

Output Impedance (Loop RCA): 600 ohms

Input Sensitivity: 100 mV / 1 W, 2200 mV – Full power

Maximum Input Voltage: 2.9 V

Signal to Noise (SN:R): -100 dB (20 Hz – 20 kHz)

Frequency Response: 5 Hz – 50 kHz

Total Harmonic Distortion THD + N@1 KHz: 0.03%

Rack Height: 2U

Dimensions (Excluding Feet (H x W x D)): 86.8 x 438 x 438 mm (37/16 x 171/4 x 1613/16")

Dimensions (Including Feet (H x W x D)): 97.2 x 438 x 438 mm (313/16 x 171/4 x 1613/16")

Width (including rack brackets): 482 mm (19")

IP Communication: TCP/IP (RJ-45 10/100 Base T)

Mains Operating Voltage: 100 –120 V @ 60 Hz | 220 – 240 V @ 50 Hz

Fuse Rating: 100-120VAC: T15AL/250V AC | 220-240VAC: T10AL/250V AC

Standby Power Consumption: <0.5 W (green mode)

Networked Standby Power Consumption: <2 W

Weight: 9.2 kg (20 lb 4 oz)

Will it suit my system? Check it works with your room and gear, or build a full system around it.

◆ Questions?

Talk to Scott before you buy

Not sure if it’s right for your room? I’ll give you honest, no-pressure advice by phone, video, or in our showroom. We’re specialists, not box-shifters.

Scott · Founder, CHT Solutions

Authorised Australian dealer: genuine Australian stock & full warranty, never grey import.