BGW BGW VXi 2.2 Amplifier - 4ch Power Amplifier Power Amplifiers

BGW VXi 2.2 Amplifier - 4ch Power Amplifier


These are a special order product, made to order with approx 10 week lead time.
  • 4 Channel Immersive Amplifier
  • 800W per Channel
  • 124dB Signal to Noise Ratio

Introducing BGW VXi 2.2 Immersive Sound Amplifiers. These BGW’s pack up to 4 channels in a single chassis, and do it with power and control never before available in any commercial amplifier. These BGW VXi 2.2 are fully-balanced differential amplifiers (an industry first) and offer unprecedented speed, control and low noise.

  • Built to withstand the rigours of commercial operation.
  • Multiple temperature sensors assure long life and reliable operational stability.
  • Impossible to overdrive the amp.
  • Distortion remains below 1% in all drive conditions.
  • Over-voltage, over-current protection.
  • Optional reporting module monitors all parameters.
  • Versatile channel assignments.
  • Dolby Atmos®, DTS and Auro-3D® friendly




DB-25 and Balanced XLR

0 to 12 dB in 1.5 dB steps

Input Impedance
47 kΩ

Input Sensitivity
1.825 Vrms for rated 8 ohm output

27.8 dB

XLR Pinout (Pin 1 = Ground, Pin 2 = Positive, Pin 3 = Negative,) DB-25 Pinout (Dolby standard)

Dimensions & Power

527mm x 482.5mm x 222mm (LxWxH)

Weight Up to 68kg

Power Requirements
2 x 8 A @ 230V AC 50-60 Hz

Power Consumption
<1/2 W on Standby
2 x 1440W Maximum fully operating



Output Power
800 W/ch @ 8Ω
1200 W/ch @ 4Ω
1600 W/ch @ 2Ω

(Continuous Average Power Rating 20Hz – 20kHz @ .05 THD or less)
8Ω – XXX Watts (56.57 Vrms)
4Ω – XXX Watts (48.99 Vrms)
2Ω – XXX Watts (34.64 Vrms)EIA
(Continuous Maximum Power Rating 1kHz @ 1% THD)8Ω – XXX Watts (62.93 Vrms )
4Ω – XXX Watts (53.02 Vrms)
2Ω – XXX Watts (41.13 Vrms)CEA
(Instantaneous Peak Power Rating – 1kHz @ 1% THD)8Ω – XXX Watts (70.90 Vrms)
4Ω – XXX Watts (63.66 Vrms),
2Ω – XXX Watts (50.46 Vrms)

Typical THD<0.05%
Maximum THD 1.0%

Slew Rate
60 V/µs

Damping Factor
>400:1 (ref. 8Ω)

>85 dB @ 20 Hz – 20 kHz

DC Offset
<10 mV (5 mV typical)

Recommended load
4/8 Ω

Frequency Response
8 Hz – 56 kHz, +0/-3 dB
20 Hz – 20 kHz, +0,-0.3 dB

Signal-to-Noise Ratio
>124 dB referenced to rated output (A-Weighted)

Speaker Outputs
1 Pair per channel High-current, 32 A Detachable “Phoenix” style connectors

Recently viewed

Customer Reviews

No reviews yet



CHT Solutions has been very prompt to respond and ship the items. I will never hesitate to buy from them again. More power to CHT Solutions!

Richard Y.
Thornleigh, NSW

CHT delivery was incredibly fast, Many thanks all for such an easy purchase process and super fast delivery. 5 stars from me

Chris N.
Malaga, WA

Buying from CHT Solutions was easy and their price was great and I would recommend then to anyone seeking good Hi Fi equipment.

John L.
Woonona, NSW

Fast delivery and great products. Would recommend them to anyone needing great service for sound advice.

Oscar F.
Truganina, VIC

CHT delivered the unit to South Australia within a couple of days. Amazing! Their phone customer service was professional and courteous. Will happily purchase from them again

Robert F.
Tranmere, SA