Velodyne 10" Wireless Subwoofer Wi-Connect 10
- Product Sent From Australia
- Fast Free Australian Shipping
- Local Australian Warranty
- Secure Online Payment
- Driver Size: 10”
- 125 Watts Amplifier
- Frequency Response Overall: 33-140 Hz
- Wireless Transmitter Included
Velodyne WiConnect 10 Inch Wireless Subwoofer delivers deep, powerful bass without the use of long running wires from the sound source. With transmitting range up to 50 feet, you can place WiConnect virtually anywhere in your room and away from walls.
The WiConnect-10 wireless subwoofer uses a 2.4 GHz transmitter with a range of up to 50’. This extensive range gives you the option to place the WiConnect-10 virtually anywhere in your room. After all, what’s the benefit of wireless, if your options are limited? The small, stylish transmitter easily fits on top of your receiver or cabinet, and can be easily mounted to a wall or other surface. The sub and transmitter have four selectable channels to link the two. This allows you to get optimum connection and avoid radio interference from another wireless device. Simply connect the subwoofer/LFE output of the receiver or TV to an RCA input jack on the transmitter and the signal is transmitted to the subwoofer via a small antenna.
An easily connected wireless subwoofer that only produces wimpy bass won’t create a real home theater. The WiConnect-10 is the solution. It was designed using Velodyne’s “Total System Design.” This approach engineers the driver (speaker), amplifier and electronics, and cabinet to ideally match each other and produce real, deep, powerful bass. The WiConnect-10 will give you goose bumps. As with every Velodyne subwoofer from the $15,000 Digital Drive 1812 on down, producing accurate, low distortion bass that gives an unequaled experience is always our goal. The WiConnect-10 delivers on that promise.
Velodyne engineers have equipped the WiConnect-10 with an extended range, down-firing, 10" driver, boasting a full two pound magnet structure and a rear-firing port. This design enhances the experience by energizing the floor while limiting audible distortion. The down-firing design also diffuses the subwoofer's output and distributes bass more evenly throughout the room resulting in fewer peaks and dips that interfere with bass performance. Most importantly, the WiConnect-10 design allows it to blend easily with your main speakers to give a true high fidelity performance.
The matching amplifier produces 125 watts of RMS power; 200 watts of Dynamic power to deliver the impact of the special effects in your favorite movies and reproduce music with the detail and accuracy for which Velodyne is known throughout the world.
Not only does your WiConnect-10 deliver dynamic, powerful, low distortion bass, it has been designed to last. To assure long life and worry free performance, the WiConnect-10 incorporates special circuitry to prevent the driver and amplifier from being overdriven and damaged. Additional circuits protect your subwoofer from overheating and from problems that would be caused by excessive drops in your voltage.
You can anticipate many years of worry free, exciting music and movie performances from the WiConnect-10
- 10" Down-Firing
- 200 Watts of Dynamic Class D Amplifier
- Low-Pass Frequency up to 50 Hz
- 1.6" Copper wound Voice Coil
- Bass Reflex with Built-in power amplifier design
- 2.4 GHz Wireless Transmitter Frequency
- 50 feet (15 meter) Wireless Transmitter Range
|Speaker Type||Active/Powered Subwoofer|
|Enclosure type||Bass Refelx|
|Frequency Response||33 Hz – 140 Hz|
|Woofer Bass Driver Size (mm)||254 mm|
|Product Dimension (H×W×D)||400 x 300 x 395 mm|
|Product Weight||16 Kg|