AMC 2N100MKII2 150W RMS Stereo Power Amplifier


  • $749.00
GST included.

It's Powerful and convenient.
These are the terms used by our customers to describe the 2N100MKII , 2 channel amplifier from AMC. 
Amplifiers reproducing these dynamic signals must do so without interfering with each other. In high-quality amplifiers, circuit design is critical in order to achieve maximum performance and exceptional sound. Each output of the amplifier is powered by an independent "Power Module"(tm). Each module is identically constructed, allowing completely independent management of signals from input to output. 

This concept enables each channel to monitor heat, current, signal, and power separately, thus greatly reducing crosstalk and increasing dynamic range and efficiency. The Power Module utilizes a unipolar output ensuring proper phase and matching between channels. The Power Module(tm), design utilizes high current output devices in conjunction with a commutating, or dual voltage power supply and over sized toroidal transformer that in combination, delivers up to 20% more power than normal amplifiers of the same size. The 2N100MKII amplifier is capable of delivering massive amounts of power into low impedance loads exhibited by virtually all modern loudspeakers.

The 2N100MKII Series amplifier uses high quality speaker binding posts that can accommodate large gauge speaker cables or banana plugs. Input jacks are supplied with parallel outputs that can be used for bi-amping or sharing signals.


  • 2 x 150W @ 8 Ohms
  • 2 x 240W @ 4 Ohms
  • High Current Amplification


  • Rated Power into 8 ohm / 4 ohm (IHF)
  • 150W / 240W
  • Rated THD and IMD
  • <0.03%
  • 1 KHz Clipping Power into 8 ohm / 4 ohm
  • 160W / 240W
  • Dynamic Power into 8 ohm / 4 ohm
  • 255W / 360W
  • Dynamic Headroom
  • 1.7dB
  • Current limit @ .1 ohm and 1 ohm
  • 30 Amps / channel
  • Output offset
  • +/-10mV Max
  • S/N Ratio for 1W/8 0hm
  • >102dB ("A" wtd)
  • Input voltage for 100 watts
  • 1 Vrms
  • Frequency Response 20Hz-20KHz  +/-.3dB   -3dB  4Hz&75KHz
  • Separation >70dB @ 20KHz
  • Damping Factor
  • >200
  • Input Impedance
  • 22K/150pf
  • DIMENSIONS (W x D x H) 2N100MKII
  • 42.5cm x 32.5cm  x 12.5cm

We Also Recommend