BGW BGW VXi 4.2 Amplifier - 6ch Power Amplifier Power Amplifiers

BGW VXi 4.2 Amplifier - 6ch Power Amplifier

BGW-VXI4.2

These are a special order product, made to order with approx 10 week lead time.
  • 6 Channel Immersive Amplifier
  • 400W per Channel
  • 124dB Signal to Noise Ratio

Introducing BGW VXi 4.2 Immersive Sound Amplifiers. The BGW pack up to 6 channels in a single chassis, and do it with power and control never before available in any commercial amplifier. These BGW VXi 4.2 are fully-balanced differential amplifiers (an industry first) and offer unprecedented speed, control and low noise.

  • Built to withstand the rigours of commercial operation.
  • Multiple temperature sensors assure long life and reliable operational stability.
  • Impossible to overdrive the amp.
  • Distortion remains below 1% in all drive conditions.
  • Over-voltage, over-current protection.
  • Optional reporting module monitors all parameters.
  • Versatile channel assignments.
  • Dolby Atmos®, DTS and Auro-3D® friendly

Specifications

Input

Connectors
DB-25 and Balanced XLR

Attenuation
0 to 12 dB in 1.5 dB steps

Input Impedance
50 kΩ

Input Sensitivity
2.5 Vrms for rated 8 ohm output

Gain
27.9 dB

Polarity
XLR Pinout (Pin 1 = Ground, Pin 2 = Positive, Pin 3 = Negative,) DB-25 Pinout (Dolby standard)

Dimensions & Power

Dimensions
527mm x 482.5mm x 222mm (LxWxH)

Mass
Weight Up to 68kg

Power Requirements
2 x 8 A Hydraulic/Magnetic Circuit Breakers @ 230V AC 50-60 Hz

Power Consumption
<1/2 W on Standby
2 x 1440W Maximum fully operating

Output

 

Output Power
400 W/ch @ 8Ω

FTC
(Continuous Average Power Rating 20Hz – 20kHz @ .05 THD or less)
8Ω – XXX Watts (56.57 Vrms)
4Ω – XXX Watts (48.99 Vrms)
2Ω – XXX Watts (34.64 Vrms)EIA
(Continuous Maximum Power Rating 1kHz @ 1% THD)8Ω – XXX Watts (62.93 Vrms )
4Ω – XXX Watts (53.02 Vrms)
2Ω – XXX Watts (41.13 Vrms)CEA
(Instantaneous Peak Power Rating – 1kHz @ 1% THD)8Ω – XXX Watts (70.90 Vrms)
4Ω – XXX Watts (63.66 Vrms),
2Ω – XXX Watts (50.46 Vrms)

Distortion
Typical THD<0.05%
Maximum THD 1.0%
IMD<0.05%

Slew Rate
60 V/µs

Damping Factor
>400:1 (ref. 8Ω)

Crosstalk
>85 dB @ 20 Hz – 20 kHz

DC Offset
<10 mV (5 mV typical)

Recommended load
4/8 Ω

Frequency Response
10 Hz – 80 kHz, +0/-3 dB

Signal-to-Noise Ratio
>124 dB referenced to rated output (A-Weighted)

Speaker Outputs
1 Pair per channel High-current, 32 A Detachable “Phoenix” style connectors



Recently viewed

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Testimonials

★★★★★

CHT Solutions has been very prompt to respond and ship the items. I will never hesitate to buy from them again. More power to CHT Solutions!

Richard Y.
Thornleigh, NSW
★★★★★

CHT delivery was incredibly fast, Many thanks all for such an easy purchase process and super fast delivery. 5 stars from me

Chris N.
Malaga, WA
★★★★★

Buying from CHT Solutions was easy and their price was great and I would recommend then to anyone seeking good Hi Fi equipment.

John L.
Woonona, NSW
★★★★★

Fast delivery and great products. Would recommend them to anyone needing great service for sound advice.

Oscar F.
Truganina, VIC
★★★★★

CHT delivered the unit to South Australia within a couple of days. Amazing! Their phone customer service was professional and courteous. Will happily purchase from them again

Robert F.
Tranmere, SA