Note: The Q Acoustics Performance Series Are Sold Per Individual Speaker
The Q Acoustics 6.5” Professional in-ceiling speakers feature the latest stereo speaker technology that so that you can enjoy great sound with minimal installation. They give you the ability to listen to music throughout your home, even in bathrooms as they are moisture proof. Now you can listen to the same music in many rooms, overcoming the impracticality of placing conventional, free standing speakers in every room.
- Bezel and grille design that clips magnetically into place, with the grille geometry being carefully optimized to ensure the perfect balance between sound and discreet appearance
- The HF is adjustable by + or - 3dB from a switch on the crossover
- Circular and square grille options are available to ensure the perfect match for each customer's decor.
- Only 6.5” in diameter, they are hardly visible in your home and take up virtually no space
- Less than 84 mm deep.
- 'UL94' flame retardant materials
- Moisture proof
- Q Install speakers come carefully packaged with installation template and fitting instructions
Easy to install
- A cutter guide is supplied to mark out the hole you need to make
- The speakers attach to your ceiling via four clamps you screw from the front
- Speaker terminals have push open connectors that you can do with one hand
- The grilles attach via magnets
Tweeter: Swivel Tweeter diameter: 1 x 1" (25mm) Woofer diameter: 165mm Power handling (program): 15-80W Impedance (nominal) ohms: 8ohm Sensitivity dB spl (2.83V, 1m): 90 (switchable HF) Response(Low freq.) -3dB Hz: 70 Maximum rear depth: 79mm Size(Round grilles): 232mm dia Warranty: 5 Years
How to guide
Select a suitable mounting location for the speaker taking note of the Warning Notices above. Using the installation template supplied mark the speaker position and cut the mounting hole.
Make sure all equipment is switched off. The speaker cable should be stripped back ~10mm so that there are bare wire ends. Remove the packaging and protective dust cover from speaker and attach the speaker leads using the pushdown spring clip terminals at the rear of the speaker. The positive conductor should be connected to the red terminal and the negative conductor to the black terminal.
Note: Tweeter output level adjustment (‘P’ & ‘CW’ versions)
It is recommended to leave the switch in the ‘0’ position for the initial sound check.
Check that each of the 4 swing out clamps are rotated inwards. Push the speaker through the mounting hole and position flush with the ceiling. Whilst holding the speaker in place tighten each of the mounting screws using a No. 2 Pozidriv® screw driver in the order shown in the diagram (left). When an increase in resistance is felt the clamp is in position.
Once the speakers are installed they should be tested before the grilles are fitted. The 6.5” Performance in-ceiling stereo speaker feature a swivel tweeter that may be adjusted allowing the high frequencies to be directed towards or away from the normal listening position as required. The tweeter’s outer frame (not dome) should be pushed gently to achieve the desired tweeter position.
The 6.5” Performance in-ceiling stereo speaker features a magnetic grille, locate the grille over the speaker bezel where it will be pulled into place. Note that square grilles may be positioned at any angle required.
Some models feature a white backing cloth behind the grille to help minimize visual contrast with the ceiling. For the very best sound performance it is recommended that this cloth is removed before use. To remove simply peel away the backing cloth from the grille.
- CHT Solutions offers Free Delivery Australia Wide for all orders.
We also offer international shipping options these will be calculated on checkout or you can contact our friendly staff either by the live chat window or by sending a support ticket.
CHT Solutions takes pride in it's high level of customer service and quick delivery time. We use a variety of delivery methods to ensure the quickest delivery times possible.
We now have stock in multiple warehouses around the country to help cut down on delivery times and some orders will be dispatched in multiple shipments depending on stock location.
99% of orders are dispatched within 1 business day, with many being dispatched the same day.
Tracking numbers are provided once products have been shipped. If for some reason you have not received a tracking number you can contact our friendly staff and they will look it up for you.
All items carry a 2 year warranty unless stated otherwise in the item description. This does not cover improper use or intentional damage.
We also offer a 30 day money back refund if your not 100% happy with our products and there not what you need. Products need to be returned in as new condition and be unused. Simply contact us to arrange return and we'll refund your money less shipping costs when we receive them.
/** * BelVG LLC. * * NOTICE OF LICENSE * * This source file is subject to the EULA * that is bundled with this package in the file LICENSE.txt. * It is also available through the world-wide-web at this URL: * http://store.belvg.com/BelVG-LICENSE-COMMUNITY.txt * ******************************************************************* * @category Belvg * @package Belvg_Productviewgallery * @version 1.5.0 * @copyright Copyright (c) 2010 - 2014 BelVG LLC. (http://www.belvg.com) * @license http://store.belvg.com/BelVG-LICENSE-COMMUNITY.txt */ ?>